Slab processing

Slab stone isa stone that is 70 cm wide in size and is extracted in large size. The length of the slab stones varies up to 3 meters andthe thickness of the stone is 2 cm. Slab stones withD are medical and are clear of any materials and veneer. The extraction of slab stones and its processing is merely the energy of the Z-Ed, so it has a high mt. 

The slab stones are made of K-piece stones, the obtained blocks are also the same as the ones and have variable dimensions. 

After extraction, the stone coupes are taken to the stone factory, then the machines are cut into sheets with a thicknessof 2 cm and different dimensions.

What are the stones for slab processing?

There are many methods in the stone industry for the processing of decorative stones. One of the most common methods is slab processing. Marble, granite, limestone, marble, porcelain, tramite and travertine are processed as slabs. Slab stones can be used in interior decoration and exterior of the building.

Processing steps in the form of slabs

1.Cut raw stone blocks

The blocksof raw stones are cut in the modification of the coop of the coop by saw machines, and now the number of raw slabs of M.A.N. horses are stronger than fragile.

2. Strengthof slab stone with epoxy rose and netting

The raw slabs of the de-dull are strong for its incremental processing, and at this stage most factories use the epoxy rose and the FaBerglas mesh net.

Choosing the right tour

 After choosingthe epoxy rose in accordance with the desired stone, M.Y. withthe appropriate tourset, chooseD. In our collectionof tours according to the noxious factories of theK.F.T.N. Tour. The ones on the market are used by Ken M. 

3. Smoothing the stone

 Afterthe tour and the epoxof the stones, the rock rolls become completely smooth and condoakht. 

4. Leaving the G.Y.in stone

 For theterm M- cracks, the stonesof the slabs inside the cavities, cracks and fractures are filled with epoxy roses and epoxy gels.

5. Resting Stones

 It is better to keep the stones in the stone depot for 48 to 72 hours, so that while the epoxy drying is based on the higher level of strengthofthe brush and the M-stones can be kept withKFT. Higher up my fresco.

6.Subston

The next step is sub-rock. In thefirst stage, the stones are shiny using saab machines andtheir money to make it transparent and to be façadewith it, of course, there are different types for the processingof the stone surface, such as:

 Leather Design Sub leather

 Submott Mat Plish hund

 Sandbladst

Bush Hammer

Butthe more commonly used process in the stone industry is surface polishing, and the unprocessed use of strip sabs and sub-gate devices.

 Slab Stone Cutting Machine

 Stone cutting machines with saws are soft and hard, which are used softly to cut limestone such as marble and marble. Saws are parallel to the hairstyles that are mattressed from diamonds. The number of grains B.N. is 40 to 80, which are put together by leaving b parallel, in hard saws instead of diamond shackles , from cast iron chip. It should be used to contain tens to 1000s of ghah. Hard saws are used to cut hard slab stones like your expensive. There is a type of saw that contains the D-YS and Dai Rah-e-Shek, which is used as a peak machine for Ed M. .

Inthe manufacture of stones, the export slabsof several stones andthe stone slabs should be preserved withD:

The stones havethe thickness of thedagh qaf. 

Haveclarity.

•  Their processhas been done withKFT.
• The surface of the obtained stone is smooth and condo. 
• Have a great saab and cut.