Points to Determine Marble Quality

Points to determine marble quality are to be discussed here. While it might not be the first thing that comes to your mind, marble is actually one of the most widely used building materials in the entire world. It’s also one of the oldest, having been used to create a number of historic building, statues, and more. If you’re looking for a way to leave a lasting mark on any visitors and increase the value of your home, you need to strongly consider having a number of marble features designed.

 

Determine Marble Quality

Marble adds a centuries-old elegance to any home or commercial building it inhabits. But, these days it can be difficult to tell if you are looking at authentic marble. There are many ways and means for inspecting the quality of marble. Before buying marble for your house, a homeowner must check its quality at the site. Here are some ways in which you can get a rough idea about the quality of marble.

 

 

 

Mesh Net

Flip the marble tile over and look at the back. If the back of the tile appears to be covered in a mesh or net, this marble is probably  more fragile than others. The mesh is fiber-glass resin and is used to reinforce the stone against cracking or breaking. This marble may not be as suitable for high traffic applications. But it is not because it may crack, but because it may scratch or etch more easily.

 

Fills with Epoxy/Resin

Examine the surface of the marble under a light, holding it at a 45-degree angle. If there are small, dull patches on an otherwise polished surface, the marble may have fill in small holes or fissures in its surface. Some stones will only have fill in the lower grades; the higher quality stones have no holes that need to be filled with epoxy or resin. Stones with fill that is not a good match in color to the stone, or stones that have large amounts of fill should be avoided. The fill may come out over time, leaving a hole in the stone that the homeowner will need to patch to prevent further damage.

 

Examining Marble Veins

Examine the marble for veins on its surface and then flip the tile over to see if there is a crack or fissure in the same place on the back of the stone. Some stones, such as Crema Marfil, are very prone to fissures and may be likely to crack if the fissure is deep enough. Small fissures are common in some stones and for wall use, or low traffic areas will not affect quality or use.

 

Marble Complete Name

Ask for the marble’s complete name. Small differences between names indicates quality of the marble. Also, ask for the marble’s hardness factor. If a stone has a high hardness factor, yet seems to have fibreglass resin, fill or fissures, this is a poor quality tile of that stone. A stone with a lower hardness factor may have these qualities present without it affecting the stone’s overall quality or use.

 

Unique Home Design

Points to determine marble quality were explained in the above passage. Marble is one of the most recognizable materials in the world. Even though it can come in different shades and colors, white marble is still one of those materials that catches anyone’s eye instantly. It glistens under a variety of lighting. And it creates a smooth surface, making it ideal for your kitchen, bathroom, and a number of other spaces in and around your home.

To learn more about us, click here. 

Sources

cmpstone.com.au/how-can-you-tell-the-quality-of-marble/

www.limestone.com/about-us/limestone-learning-center/the-benefits-of-marble-as-a-building-material/